Pedal Commander® スロットルレスポンスコントローラー 用 ヒュンダイ Ioniq

DISCLAIMER

Pedal Commander®'s Anti-Theft mode provides an additional layer of security to protect your vehicle. Whilst activating the Anti-Theft mode is designed to enhance vehicle security, it is important to remember that Pedal Commander® does not guarantee absolute anti-theft. This feature is intended to complement your overall security measures.

Users are advised to exercise caution and take additional security measures such as locking the vehicle and parking in secure areas. Pedal Commander® does not guarantee the complete prevention of theft or any damage resulting from the use of the Anti-Theft mode and accepts no legal liability for such cases.

It is the user's responsibility to exercise caution and adopt comprehensive security practices. In the unfortunate event of an attempted theft, users should immediately contact law enforcement authorities. Pedal Commander® reminds users of the importance of user awareness and proactive participation to ensure the safety of their vehicles and wishes them a pleasant ride.

Calibration Process

In Pedal Commander® mobile app, go to the Anti-Theft menu and click the Anti-Theft Mode Calibration button, then follow these steps:

Ignition On: Turn the key to the ON position without starting the engine, or press the Engine Start button without pushing the brake pedal so the engine does not crank.

Set Voltage Ratings: Do not press the accelerator; save the voltage reading as the MIN value. Then press the accelerator pedal all the way down, and once the voltage reading is steady, save it as the MAX value.

Save and Exit: Make sure the voltage readings are correct, then save to complete the calibration procedure.

IMPORTANT: Do not press the accelerator pedal during the calibration process. Once the calibration is complete, you can use the anti-theft mode whenever needed.